DTC P0106: Manifold Absolute Pressure (MAP/BARO) Sensor Range/Performance
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0106 - MANIFOLD ABSOLUTE PRESSURE (MAP/BARO) SENSOR RANGE/PERFORMANCE
| Description: | MAP sensor input to the powertrain control module (PCM) is monitored and is not within the calibrated value. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | VREF voltage should be between 4.0 and 6.0 volts. The PID reading is in frequency. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Vehicles with an EGR system module (ESM) | GO to DM: Manifold Absolute Pressure (MAP) Sensor STEP DM14. | ||
| All others | GO to DM: Manifold Absolute Pressure (MAP) Sensor STEP DM16. | ||