LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 753 (Engine Controls - Powertrain DTC Charts & Descriptions - CNG, Flex-Fuel & Gasoline) >> Diagnostic Trouble Code (DTC) Charts >> P0511 - Idle Air Control Circuit Malfunction

P0511 - Idle Air Control Circuit Malfunction

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0511 - IDLE AIR CONTROL CIRCUIT MALFUNCTION

Description:  This DTC is set when the PCM detects an electrical load failure on the IAC output circuit.
Possible Causes: 
  • IAC circuit open.
  • VPWR to IAC solenoid open.
  • IAC circuit shorted to PWR.
  • Damaged IAC valve.
  • PCM damaged.
  • IAC circuit short to GND.
Diagnostic Aids:  The IAC solenoid resistance is 6 to 13 ohms. Monitor the IAC PID duty cycle and/or voltage.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST KE: IDLE AIR CONTROL (IAC) VALVE Step 2.