Fuel Rail Valve Circuit Operation
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
When the key is turned to the ON position, the power relay is turned on. The power relay provides power to the PCM and the control side of the fuel shut off valve relay. The relay provides voltage to the fuel rail valve. If the ignition switch is not turned to the START position, the PCM will shut off the fuel rail valve after one second. The PCM will open the valve (along with the four tank valves) to provide fuel while cranking. The valve will remain open when the engine is running unless the inertia fuel shut-off switch is "tripped."