(Torque Based) Electronic Throttle Control (ETC): Overview
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
The Generation II (Gen II) Torque Based Electronic Throttle Control (ETC) is a hardware and software strategy that delivers a transmission output shaft torque (via throttle angle) based on driver demand (pedal position). It utilizes an electronic throttle body, the PCM and a accelerator pedal assembly to control throttle opening and engine torque. The ETC system basically replaces the standard cable operated accelerator pedal, idle air control (IAC) motor, 3-wire throttle position sensor (TPS) and mechanical throttle body.