LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 749 (Automatic Transmission - 4R100) >> In-Vehicle Repair >> Vehicle Speed Sensor (VSS) - 7.3L Diesel >> Removal

Vehicle Speed Sensor (VSS) - 7.3L Diesel: Removal

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the vehicle speed sensor (VSS).
    1. Disconnect the VSS electrical connector.
    2. Remove the bolt.
    3. Remove the VSS.
    Fig 1: Removing Vehicle Speed Sensor
    G01538863Courtesy of FORD MOTOR CO.
  3. Remove the vehicle speed sensor driven gear.
    1. Remove the retaining clip.
    2. Remove the driven gear.
    Fig 2: Removing Vehicle Speed Sensor Driven Gear
    G01538864Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals