LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 749 (Automatic Transmission - 4R100) >> In-Vehicle Repair >> Extension Housing Seal And Bushing >> Removal

Extension Housing Seal And Bushing: Removal

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the driveshaft. For additional information, refer to DRIVESHAFT .
  3. Using the special tools, remove the extension housing seal.
    Fig 1: Removing Extension Housing Seal Using Special Tool
    G01538880Courtesy of FORD MOTOR CO.
    4. CAUTION: Do not damage any machined surfaces. The new seal may leak.
    Fig 2: Removing Extension Housing Bushing Using Special Tool
    G01538881Courtesy of FORD MOTOR CO.
  4. Using the special tool, remove the extension housing bushing.
scientia non olet · About LEMON Manuals