LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 749 (Automatic Transmission - 4R100) >> Disassembly And Assembly Of Subassemblies >> Main Control Valve Body - Disassembly And Assembly >> Assembly

Main Control Valve Body - Disassembly And Assembly: Assembly

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the control valves and springs from the lower main control valve body.
    Fig 1: Installing Control Valves And Springs From Lower Main Control Valve Body
    G01539080Courtesy of FORD MOTOR CO.
  2. Install the control valves and springs from the upper main control valve body.
    Fig 2: Installing Control Valves And Springs From Upper Main Control Valve Body
    G01539081Courtesy of FORD MOTOR CO.
  3. Install the check ball.
    Fig 3: Installing Check Ball
    G01539082Courtesy of FORD MOTOR CO.
  4. Using the special tools, install the lower control valve body.
    1. Install the special tools.
    2. Install the control valve body separator plate.
    3. Install the lower control valve body.
    4. Install the bolts.
    Fig 4: Installing Lower Control Valve Body Using Special Tool
    G01539083Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals