LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 745 (Engine Controls - Symptom Charts -- 6.0L Diesel (99P E-Series & 99P F450/550)) >> Symptom Charts >> Chart 10

Chart 10

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Ford RV Cutaway, 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, and 2004 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
SYSTEM/COMPONENT REFERENCE (PINPOINT TEST - 6.0L DIESEL unless noted)
Check ABS Light REPAIR if necessary.
Check Brake Warning Light GO to PINPOINT TEST AI: BRAKE PEDAL POSITION SWITCH if light is on.
Perform KOEO On-Demand Self Test and Retrieve/Clear Continuous DTCs GO to the appropriate pinpoint test.
Road Test GO to DIAGNOSTIC METHODS - 6.0L DIESEL , Parameter Identification (PID), SELECT Parameter Identification (PID). SELECT PIDs: PBPP, BPP1, BPP2, CPP/TCS, SCCS and VSS. DRIVE vehicle and FUNCTION speed control system. COMPARE VSS to speedometer. If the scan tool does not display the correct values for each PID selected, GO to the appropriate pinpoint test.
Check Speed Control If speed control drops out when climbing hills, engine power is not adequate to hold hill. If it does not drop, GO to CHART 7 .
Check Vehicle Load If vehicle load is too heavy to hold hills, CONFIRM condition with scan tool PID VSS. If it holds hills, GO to CHART 7 .