LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 732 (Four Wheel Drive Systems) >> Removal And Installation >> Transfer Case External Components >> Item 4: Rear Output Shaft Oil Seal Removal Note

Item 4: Rear Output Shaft Oil Seal Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, remove the rear output shaft oil seal.
    Fig 1: Removing Rear Output Shaft Oil Seal
    G03182414Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals