LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 732 (Four Wheel Drive Systems) >> Disassembly And Assembly >> Transfer Case - Electronic Shift >> Item 36: Front Planetary Gear Set Assembly Disassembly Note

Item 36: Front Planetary Gear Set Assembly Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front planetary gear set assembly.
    1. Expand the snap ring.
    2. Remove the front planetary gear set assembly.
    Fig 1: Removing Front Planetary Gear Set Assembly
    G03182464Courtesy of FORD MOTOR CO.
  2. Remove the parts in the order indicated in the following illustration and table.
    Fig 2: Identifying Snap Ring And Thrust Bearing
    G03182465Courtesy of FORD MOTOR CO.
  3. To assemble the front planetary gear set assembly, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals