LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Automatic Transmission - Diagnosis - 4R100) >> Description & Operation >> Input Devices >> Accelerator Pedal Position Sensor (7.3L DI Turbo Diesel Only)

Accelerator Pedal Position Sensor (7.3L DI Turbo Diesel Only)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2002 Lincoln Navigator, 2002 Ford Expedition, 2001 Lincoln Navigator, 2001 Ford RV Cutaway, and 2001 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Accelerator Pedal (AP) position sensor is mounted on accelerator pedal on models with 7.3L diesel engines only. The AP position sensor detects position of accelerator pedal and sends information back to PCM as a voltage signal. If AP position sensor or related circuits fail, PCM recognizes a fault and boosts line pressure to prevent damage to transmission. This will create harsher upshifts and engagements.