LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 729 (Engine - 6.0L Diesel - F250-F550 Super Duty) >> Specifications >> Standard Torque Pipe Thread

Standard Torque Pipe Thread

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
STANDARD TORQUE PIPE THREAD

Thread Size Torque (1)
1/8 in NPT 10.2 N.m (7 lb-ft)
1/4 in NPT 13.6 N.m (10 lb-ft)
3/8 in NPT 20.4 N.m (15 lb-ft)
1/2 in NPT 34 N.m (25 lb-ft)
3/4 in NPT 40.8 N.m (30 lb-ft)
(1) Tolerances are +/- 10% of nominal value.
scientia non olet · About LEMON Manuals