LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 725 (Wheel Hubs And Bearings - Full Floating Axle - DANA) >> Removal And Installation >> Axle Shaft >> Installation

Axle Shaft: Installation

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: If the original bolts are being reused, apply a suitable thread adhesive to the bolts.
    NOTE: Torque specifications are the same for SRW or DRW vehicles.
    Fig 1: Identifying Axle Shaft Bolt
    G01948400Courtesy of FORD MOTOR CO.
  1. Follow the removal procedure in reverse order.
scientia non olet · About LEMON Manuals