LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 710 (Anti-Lock Brake Control System - 4 Wheel - Excursion & F250-F550 Super Duty) >> Removal & Installation >> Front Wheel Speed Sensor Ring - 4X2 >> Installation

Front Wheel Speed Sensor Ring - 4X2: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The front wheel speed sensor indicator must be pressed on straight.
  1. Use an appropriate size cylinder and press to install the front wheel speed sensor indicator.
    Fig 1: Installing Front Wheel Speed Sensor Indicator
    G02769949Courtesy of FORD MOTOR CO.
  2. Install the front disc brake rotor. Refer to FRONT BRAKE ROTOR .
scientia non olet · About LEMON Manuals