LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 710 (Anti-Lock Brake Control System - 4 Wheel - Excursion & F250-F550 Super Duty) >> Removal & Installation >> Front Wheel Speed Sensor - 4X4 >> Removal

Front Wheel Speed Sensor - 4X4: Removal

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the front wheel speed sensor electrical connector.
    Fig 1: Disconnecting Front Wheel Speed Sensor Electrical Connector
    G02769944Courtesy of FORD MOTOR CO.
  2. Remove the front disc brake rotor shield.
  3. Remove the (A) front wheel speed sensor bolts and the (B) front wheel speed sensor.
    Fig 2: Removing Front Wheel Speed Sensor Bolts & Front Wheel Speed Sensor (4x4 shown, 4x2 similar)
    G02769945Courtesy of FORD MOTOR CO.