LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Safety Belt System - Excursion & F250-F550 Super Duty) >> Removal And Installation >> Safety Belt - Front Bench Seat >> Installation

Safety Belt - Front Bench Seat: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Make sure the safety belt webbing is not twisted prior to installation.
    NOTE: Make sure to tighten bolts to specification.
    Fig 1: Installing Safety Belt Tongue
    G02774706Courtesy of FORD MOTOR CO.
  1. To install, reverse the removal procedure.
  2. Check the restraint system for correct operation.