LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Safety Belt System - Excursion & F250-F550 Super Duty) >> Removal And Installation >> Rear Safety Belt Retractor - Second Row, Inboard, Excursion >> Installation

Rear Safety Belt Retractor - Second Row, Inboard, Excursion: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the safety belt retractor
    1. Position the safety belt retractor under the seat frame.
    2. Align the tab to the slot in the floor.
    3. Install the bolt.
    Fig 1: Installing Bolt
    G02774630Courtesy of FORD MOTOR CO.
  2. Install the safety belt bracket cover.
    Fig 2: Installing Safety Belt Bracket Cover
    G02774631Courtesy of FORD MOTOR CO.
  3. Adjust the seat to the full forward and rearward positions a few times to ensure safety belt and buckle accessibility.
  4. Check the restraint system for correct operation.
scientia non olet · About LEMON Manuals