Safety Belt Replacement Label: Notes
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Whenever the yellow portion of the label is visible, the safety belt must be replaced.
WARNING:
Failure to follow these instructions will affect the performance of the safety belts and increase the risk of personal injury.
WARNING:
After any vehicle collision, the safety belt system at all outboard seating positions (except driver, which has no "automatic locking retractor" feature) must be checked by a qualified technician to verify that the "automatic locking retractor" feature for child seats is still functioning properly, in addition to other checks for proper safety belt system function. A belt and retractor assembly must be replaced if the safety belt assembly's "automatic locking retractor" feature or any other safety belt function is not operating properly when checked according to the procedures in the workshop manual. Failure to replace the Belt and Retractor assembly could increase the risk of injury in collisions.