LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 709 (Safety Belt System - Excursion & F250-F550 Super Duty) >> Description And Operation >> Safety Belt System >> Child Safety Seat Tether Anchor >> F-Series Super Duty >> Notes

F-Series Super Duty: Notes

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: The child safety seat tether anchor/bolt MUST be securely tightened to specification. Otherwise, the child safety seat may not be correctly secured and the child could be injured if the vehicle is involved in a collision or stops suddenly.

If you have a SuperCab or Crew Cab, Ford recommends you attach child safety seats in the rear seating position (if possible) with a tether strap attached to the tether anchor bracket as shown in the instructions provided with the child safety seat.

Any child safety seat tether anchor in use during a collision must be inspected and installed new if damaged. Rework the sheet metal to its original condition and structural integrity. Refer to the appropriate REMOVAL AND INSTALLATION  procedure.

scientia non olet · About LEMON Manuals