LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Handles, Locks, Latches & Entry Systems -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Tailgate Release Handle >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the tailgate.
    Fig 1: Opening Tailgate
    G02774459Courtesy of FORD MOTOR CO.
  2. Remove the tailgate access panel.
    1. Remove the screws.
    2. Remove the tailgate access panel.
      Fig 2: Removing Tailgate Access Panel
      G02774460Courtesy of FORD MOTOR CO.
  3. Disconnect the tailgate actuating rods from the remote control.
    1. Open the clips.
    2. Disconnect the rods.
      Fig 3: Disconnecting Tailgate Actuating Rods From Remote Control
      G02774461Courtesy of FORD MOTOR CO.
  4. Remove the tailgate release handle.
    1. Remove the nuts.
    2. Remove the tailgate release handle.
    3. Remove the tailgate latch remote control.
      Fig 4: Removing Tailgate Release Handle
      G02774462Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.