LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Handles, Locks, Latches & Entry Systems -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Liftgate Lock Cylinder >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate trim panel.
  2. Release the lock cylinder rod.
    Fig 1: Releasing Lock Cylinder Rod
    G02774470Courtesy of FORD MOTOR CO.
  3. Remove the lock cylinder.
    1. Remove the clip.
    2. Remove the lock cylinder.
      Fig 2: Removing Lock Cylinder
      G02774471Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals