LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Handles, Locks, Latches & Entry Systems -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Hood Latch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark the position of the hood latch.
  2. Remove the hood latch bolts.
    Fig 1: Removing Hood Latch Bolts
    G02774396Courtesy of FORD MOTOR CO.
  3. Disconnect the hood latch release cable from the hood latch.
    • Disconnect the cable conduit.
    • Disconnect the cable.
      Fig 2: Disconnecting Hood Latch Release Cable From Hood Latch
      G02774397Courtesy of FORD MOTOR CO.
  4. Remove the hood latch.
  5. To install, reverse the removal procedure.