LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Handles, Locks, Latches & Entry Systems -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Door Latch Remote Control - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim panel. Refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the interior front door handle. Refer to INTERIOR DOOR HANDLE - FRONT .
  3. Remove the retaining clips.
    Fig 1: Removing Retaining Clips
    G02774473Courtesy of FORD MOTOR CO.
  4. Remove the front door latch remote control.
    1. Remove the cable conduit.
    2. Remove the cable.
    3. Remove the remote control.
      Fig 2: Removing Front Door Latch Remote Control
      G02774474Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.