Removal and Installation
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
All Vehicles
- Disconnect the battery ground cable. Refer to BATTERY, MOUNTING AND CABLES .
- Open the sunglass compartment and remove the screw.
- Release the front of the overhead console.
Vehicles without video display
- Release the rear of the overhead console.
- Remove the overhead console.
- Disconnect the electrical connectors.
Vehicles with video display
- Remove the air vent.
- Remove the screws.
- Lower the overhead console.
- Open the video display.
- Remove the screws.
- Connect the strap if it has become detached.
- Disconnect the front electrical connectors.
- Disconnect the rear electrical connectors.
- Disconnect the strap and remove the overhead console.
- To install, reverse the removal procedure.
NOTE:
The overhead console is equipped with a strap to provide support during removal and installation.