Rear Seat Backrest - Excursion, Third Row: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Install the seat back frame to the seat cushion frame.
1. Position the seat back.
2. Install the four bolts.
  
  Fig 1: Installing Seat Back Frame To Seat Cushion Frame
  Courtesy of FORD MOTOR CO.
Install the lower RH adjuster cover.
- Install the three pin-type retainers.
  
  Fig 2: Installing Lower RH Adjuster Cover Pin-Type Retainers
  Courtesy of FORD MOTOR CO.
Install the seat adjuster handle.

Fig 3: Installing Seat Adjuster Handle
Courtesy of FORD MOTOR CO.
Install the LH lower pivot cover.
- Install the three pin-type retainers.
  
  Fig 4: Installing LH Lower Pivot Cover Pin-Type Retainers
  Courtesy of FORD MOTOR CO.
Check the active restraint system for correct operation. Refer to SAFETY BELT SYSTEM .