LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 705 (Seat System -- Excursion & F250-F550 Super Duty) >> Disassembly And Assembly >> Rear Seat Backrest - Third Row >> Assembly

Rear Seat Backrest - Third Row: Assembly

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the two seat adjusters.
    1. Position the seat adjusters.
    2. Install the two bolts.
      Fig 1: Installing Seat Adjusters
      G02774047Courtesy of FORD MOTOR CO.
  2. Install the two upper seat adjuster covers.
    • Install the pin-type retainers.
      Fig 2: Installing Pin-Type Retainers
      G02774048Courtesy of FORD MOTOR CO.
  3. Install the seat cover on the seat cushion.
  4. Install the seat backrest frame into the seat backrest trim cover and cushion foam pad.
    1. Install the seat backrest frame into the seat backrest trim cover and cushion foam pad.
    2. Connect the seat cover J-clips.
      • Install the hog rings from foam to frame.
        Fig 3: Installing Hog Rings From Foam To Frame
        G02774049Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals