LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 702 (Body Panel System - Front End Body Panels -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Fender >> Installation

Removal And Installation: Fender: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Follow the removal procedure in reverse order.
    Fig 1: Installing Hood Support Bolt
    G02773503Courtesy of FORD MOTOR CO.
    Fig 2: Installing Upper Fender Retaining Bolts
    G02773504Courtesy of FORD MOTOR CO.
    Fig 3: Installing Bolts Securing Lower Rear Of Front Fender
    G02773505Courtesy of FORD MOTOR CO.
Fig 4: Installing Fender Retaining Bolts
G02773506Courtesy of FORD MOTOR CO.
Fig 5: Installing Fender-To-Radiator Support Retaining Screws
G02773507Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals