Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The following removal and installation procedure applies to all audio units.

Remove the audio unit from the instrument panel.
1. Use the special tool to release the audio unit retaining clips.
2. Apply outward pressure on the special tool while pulling the audio unit away from the instrument panel.
3. Remove the audio unit.
  - Disconnect the audio unit electrical connectors.
    
    Fig 1: Removing Audio Unit From Instrument Panel
    Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.