LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 677 (Acceleration Control System - Excursion & F250-F550 Super Duty) >> Removal And Installation >> Accelerator Pedal - Fixed, Diesel Engines >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The accelerator pedal and sensor assembly is a non-adjustable, calibrated unit and must be handled with care.
  1. Disconnect the electrical connector.
    Fig 1: Disconnecting Electrical Connector
    G02777056Courtesy of FORD MOTOR CO.
  2. Remove the bolts and remove the accelerator pedal and sensor assembly.
    Fig 2: Removing Accelerator Pedal And Sensor Assembly
    G02777057Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals