LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 675 (Fuel System - General Information - Gasoline & Diesel - Excursion & F250-F550 Super Duty) >> General Procedures >> Fuel Line Fittings - Push Connect >> Connect

Fuel Line Fittings - Push Connect: Connect

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the fitting.
    • Lubricate the tube end with clean engine oil to ease assembly.
    • Align the tube to the fitting and push until you hear a click.
      Fig 1: Aligning Tube To Fitting
      G02776976Courtesy of FORD MOTOR CO.
  2. Pull on the fitting to make sure it is fully engaged, then install the safety clip.
    Fig 2: Installing Safety Clip
    G02776977Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals