Description And Operation: GEARTRAIN: Notes

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Power is transmitted from the torque converter to the geartrain components through the input shaft and forward clutch cylinder.

By holding or driving certain members of the gearset, five forward ratios and one reverse ratio are obtained and transmitted to the output shaft. The ratios are as follows:

GEAR RATIO

Gear Ratio

FIRST

3.09 TO 1

SECOND

2.2 TO 1

THIRD

1.538 TO 1

FOURTH ⁽¹⁾

1.096 TO 1

FIFTH ⁽¹⁾

1 TO 1

SIXTH ⁽¹⁾

0.712 TO 1

REVERSE

2.88 to 1

⁽¹⁾	Special operating strategy is enabled when transmission temperature is less than -15°C (5°F)