Torque Specifications
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | N.m. | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Center support fluid feed bolt (two rear) | 16 | 12 | - |
| Cooler bypass valve (CBV) fitting to case (front) | 30 | 22 | - |
| Cooler bypass valve (CBV) fitting to case (rear) | 37 | 27 | - |
| Cooler line fitting to CBV (front and rear) | 27 | 20 | - |
| Control assembly to pump | 27 | 20 | - |
| Torque converter drain plug | 12 | 9 | - |
| Extension housing to case | 27 | 20 | - |
| Transmission insulator and retainer-to-case | 94 | 69 | - |
| Transmission insulator and retainer-to-crossmember (rear mount) | 94 | 69 | - |
| Torque converter-to-flexplate nut | 35 | 26 | - |
| Inner manual valve detent lever nut | 47 | 35 | - |
| Low/reverse OWC inner race to case | 29 | 21 | - |
| Line pressure to case - plug | 12 | 9 | - |
| Main and lower control body to case | 10 | - | 89 |
| Main accumulator and solenoid body to case | 10 | - | 89 |
| Digital Transmission Range Sensor (TRS) | 9 N.m. | 6.67 Ft. Lbs. | 80 In. Lbs. |
| Intermediate/overdrive cylinder fluid feed bolt (front) | 16 | 12 | - |
| Transmission pan to case | 15 | 11 | - |
| Pump body to case | 27 | 20 | - |
| Parking pawl abutment to case | 25 | 18 | - |
| Parking rod guide plate to case | 25 | 18 | - |
| Manual control valve detent lever spring to case | 10 | - | 89 |
| Reinforcing plate to case | 10 | - | 89 |
| Stator support to pump body | 10 | - | 89 |
| Transmission to engine | 47 | 35 | - |
| Transmission support crossmember-to-frame | 81 | 60 | - |
| Output Shaft Speed (OSS) Sensor | 9 N.m. | 6.67 Ft. Lbs. | 80 In. Lbs. |
| Turbine Shaft Speed (TSS) Sensor | 9 N.m. | 6.67 Ft. Lbs. | 80 In. Lbs. |