LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 665 (Automatic Transmission - 4R100 - Excursion & F250-F550 Super Duty) >> In-Vehicle Repair >> Digital Transmission Range (Tr) Sensor >> Removal

Digital Transmission Range (Tr) Sensor: Removal

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If the vehicle is equipped with a power take-off unit, all or part of the PTO unit may need to be removed.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to Jacking & Lifting .
  2. Disconnect the connector.
    Fig 1: Disconnecting Connector
    G02775018Courtesy of FORD MOTOR CO.
  3. Disconnect the shift cable at the manual control lever.
    Fig 2: Disconnecting Shift Cable At Manual Control Lever
    G02775019Courtesy of FORD MOTOR CO.
  4. Remove the digital transmission range (TR) sensor.
  5. Remove the bolts.
  6. Remove the digital transmission range (TR) sensor.
    Fig 3: Removing Digital Transmission Range (TR) Sensor
    G02775020Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals