LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 665 (Automatic Transmission - 4R100 - Excursion & F250-F550 Super Duty) >> Disassembly & Assembly Of Subassemblies >> Input Shell >> Disassembly

Input Shell: Disassembly

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove and discard the forward/reverse sun gear retaining ring.
    Fig 1: Removing And Discard Forward/Reverse Sun Gear Retaining Ring
    G02775299Courtesy of FORD MOTOR CO.
  2. Remove the No. 14 input shell thrust washer.
    Fig 2: Removing No. 14 Input Shell Thrust Washer
    G02775300Courtesy of FORD MOTOR CO.
  3. Remove the forward/reverse sun gear.
    Fig 3: Removing Forward/Reverse Sun Gear
    G02775301Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals