LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 665 (Automatic Transmission - 4R100 - Excursion & F250-F550 Super Duty) >> Disassembly & Assembly Of Subassemblies >> Forward Hub & Ring Gear >> Disassembly

Forward Hub & Ring Gear: Disassembly

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the No. 8C forward clutch hub thrust washer.
    Fig 1: Removing No. 8C Forward Clutch Hub Thrust Washer
    G02775237Courtesy of FORD MOTOR CO.
  2. Remove the forward hub retaining ring.
    Fig 2: Removing Forward Hub Retaining Ring
    G02775238Courtesy of FORD MOTOR CO.
  3. Remove the forward hub.
    Fig 3: Removing Forward Hub
    G02775239Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals