LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 663 (Electronic Engine Controls - Gasoline Engine -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Idle Air Control (IAC) Valve - 5.4L, 6.8L >> Removal

Idle Air Control (IAC) Valve - 5.4L, 6.8L: Removal

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. Refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the idle air control (IAC) valve electrical connector.
    Fig 1: Disconnecting Idle Air Control (IAC) Valve Electrical Connector
    G02773428Courtesy of FORD MOTOR CO.
  3. Disconnect the throttle bypass hose.
    Fig 2: Disconnecting Throttle Bypass Hose
    G02773429Courtesy of FORD MOTOR CO.
  4. Remove the two bolts and the IAC valve.
    Fig 3: Removing Two Bolts Of IAC Valve
    G02773430Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals