LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 654 (Engine - 6.8L - Excursion & F250-F550 Super Duty) >> In-Vehicle Repair >> Oil Pump >> Installation

Oil Pump: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean and inspect the mating surfaces.
  2. Position the oil pump and loosely install the bolts. Tighten the bolts in the sequence shown.
    Fig 1: Identifying Tightening Sequence Of Oil Pump Bolts
    G02771460Courtesy of FORD MOTOR CO.
  3. Install the oil pan. Refer to OIL PAN - AUTOMATED EQUIPMENT  or OIL PAN - MANUAL TRANSMISSION .
  4. Install the timing chain. Refer to TIMING DRIVE COMPONENTS .
  5. Connect the battery ground cable.
scientia non olet · About LEMON Manuals