Intake Manifold Assembly: Assembly

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Install the water crossover tube.

Fig 1: Installing Water Crossover Tube
Courtesy of FORD MOTOR CO.
Install the engine noise shield.

Fig 2: Installing Engine Noise Shield
Courtesy of FORD MOTOR CO.

NOTE: Lubricate the O-ring seals with clean engine oil, to aid installation.

Fig 3: Installing Fuel Injectors Into Fuel Injection Supply Manifold

Courtesy of FORD MOTOR CO.

Install the fuel injectors into the fuel injection supply manifold.
Install the fuel injection supply manifold.

Fig 4: Installing Fuel Injection Supply Manifold
Courtesy of FORD MOTOR CO.
Install a new throttle body adapter gasket.

Fig 5: Installing Throttle Body Adapter Gasket
Courtesy of FORD MOTOR CO.
Install the throttle body adapter.
- Install the four bolts.
  
  Fig 6: Installing Throttle Body Adapter
  Courtesy of FORD MOTOR CO.
Install the differential pressure feedback EGR system bracket.

Fig 7: Installing Differential Pressure Feedback EGR System Bracket
Courtesy of FORD MOTOR CO.