LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 652 (Engine System - General Information - Excursion & F250-F550 Super Duty (Gasoline)) >> General Procedures >> Valve - Spring Squareness

Valve - Spring Squareness

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the out-of-square on each valve spring.
    • Turn the valve spring and observe the space between the top of the valve spring and the square. Install a new valve spring if out of square.
      Fig 1: Measuring Out-Of-Square On Valve Spring
      G02770397Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals