Camshaft End Play

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Special Tool(s)

Fig 1: Identifying Special Tool(s)

Courtesy of FORD MOTOR CO.

Use a Dial Indicator Gauge with Holding Fixture to measure camshaft end play.
Position the camshaft to the rear of the cylinder head.
Zero the indicator.
Move the camshaft to the front of the cylinder head. Note and record the camshaft end play.
- If camshaft end play exceeds specifications, install new camshaft and recheck end play.
- If camshaft end play exceeds specification after camshaft installation, install a new cylinder head.
  
  Fig 2: Measuring Camshaft End Play Using Special Tool
  Courtesy of FORD MOTOR CO.