LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 649 (Steering Linkage -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Sector Shaft Arm >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Replace the steering gear sector shaft arm if it is bent. If the steering gear sector shaft arm is bent, check remainder of the steering linkage system for signs of damage. Replace any damaged steering linkage parts as required. Do not attempt to straighten the steering gear sector shaft arm or any other steering linkage components.
scientia non olet · About LEMON Manuals