LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (Front Drive Axle/Differential -- Excursion & F250-F550 Super Duty) >> In-Vehicle Repair >> Axle Shaft Seal >> Installation

Axle Shaft Seal: Installation

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the axle shaft seal.
    Fig 1: Installing Axle Shaft Seal
    G02769621Courtesy of FORD MOTOR CO.
  2. Install the new main seal onto the axle shaft.
    1. Position the main seal onto the axle shaft.
    2. Using the special tools and a hammer, seat the main seal onto the axle shaft.
      Fig 2: Installing New Main Seal Onto Axle Shaft
      G02769622Courtesy of FORD MOTOR CO.
  3. Position the axle shaft into the axle housing.
  4. Using the special tools and a hammer, install the main seal into the wheel knuckle.
    Fig 3: Installing Main Seal Into Wheel Knuckle Using Special Tool
    G02769623Courtesy of FORD MOTOR CO.
  5. Install the wheel hub and bearing. Refer to WHEELS & TIRES .
  6. Install the front brake disc. Refer to DISC
scientia non olet · About LEMON Manuals