LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (Seat System) >> Removal And Installation >> Seat - Rear, Quad Bucket >> Removal

Seat - Rear, Quad Bucket: Removal

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disengage the detachable safety belt anchor.
    1. Insert a key or small screwdriver into the slot in the detachable anchor and lift upward.
    2. Disengage the detachable anchor tongue end from the detachable anchor.
    Fig 1: Disowning Detachable Safety Belt Anchor
    G02767092Courtesy of FORD MOTOR CO.
  2. Pull the handle to release the rear bucket seat from the pedestal.
    Fig 2: Pulling Handle Rear Bucket Seat From Pedestal
    G02767093Courtesy of FORD MOTOR CO.
  3. Slide the seat toward the right-hand side of the vehicle.
    Fig 3: Sliding Seat Toward Right-Hand Side Of Vehicle
    G02767094Courtesy of FORD MOTOR CO.
  4. Remove the rear bucket seat.