LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 599 (Automatic Transmission - 4R100) >> In-Vehicle Repair >> Digital Transmission Range (Tr) Sensor >> Removal

Digital Transmission Range (Tr) Sensor: Removal

WARNING: This page is about a different car, the 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Disconnect the digital transmission range (TR) sensor connector.
    Fig 1: Disconnecting Digital Transmission Range (TR) Sensor Connector
    G02762132Courtesy of FORD MOTOR CO.
  3. Disconnect the shift cable at the manual control lever.
    Fig 2: Disconnecting Shift Cable At Manual Control Lever
    G02762133Courtesy of FORD MOTOR CO.
  4. Remove the digital TR sensor.
    1. Remove the bolts.
    2. Remove the sensor.
    Fig 3: Removing Digital TR Sensor
    G02762134Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals