LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 599 (Automatic Transmission - 4R100) >> Disassembly & Assembly Of Subassemblies >> Main Control Valve Body-Disassembly & Assembly >> Assembly

Main Control Valve Body-Disassembly & Assembly: Assembly

WARNING: This page is about a different car, the 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the control valves and springs from the lower main control valve body.
    Fig 1: Installing Control Valves And Springs From Lower Main Control Valve Body
    G02762238Courtesy of FORD MOTOR CO.
  2. Install the control valves and springs from the upper main control valve body.
    Fig 2: Installing Control Valves And Springs From Upper Main Control Valve Body
    G02762239Courtesy of FORD MOTOR CO.
  3. Install the check ball.
    Fig 3: Installing Check Ball
    G02762240Courtesy of FORD MOTOR CO.
  4. Using the special tools, install the lower control valve body.
    1. Install the special tools.
    2. Install the control valve body separator plate.
    3. Install the lower control valve body.
    4. Install the bolts.
    Fig 4: Installing Control Valve Body Separator Plate
    G02762241Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals