LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 599 (Automatic Transmission - 4R100) >> Disassembly & Assembly Of Subassemblies >> Input Shell >> Disassembly

Input Shell: Disassembly

WARNING: This page is about a different car, the 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove and discard the forward/reverse sun gear retaining ring.
    Fig 1: Removing And Discard Forward/Reverse Sun Gear Retaining Ring
    G02762409Courtesy of FORD MOTOR CO.
  2. Remove the No. 14 input shell thrust washer.
    Fig 2: Removing Input Shell Thrust Washer
    G02762410Courtesy of FORD MOTOR CO.
  3. Remove the forward/reverse sun gear.
    Fig 3: Removing Forward/Reverse Sun Gear
    G02762411Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals