LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 594 (Engine Emission Control) >> Removal And Installation >> Exhaust Gas Recirculation (EGR) Valve - 4.6L >> Removal

Exhaust Gas Recirculation (EGR) Valve - 4.6L: Removal

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the exhaust gas recirculation (EGR) valve.
    1. Disconnect the vacuum line.
    2. Disconnect the EGR valve tube fitting.
    3. Remove the bolts.
      • Discard the gasket.
    Fig 1: Removing Exhaust Gas Recirculation (EGR) Valve
    G02761674Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals