Crankshaft Rear Seal with Retainer Plate: Removal

WARNING: This page is about a different car, the 2004 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Remove the oil pan. For additional information, refer to OIL PAN .
Remove the flexplate. For additional information, refer to FLEXPLATE .
Use the special tools to remove the crankshaft rear oil seal slinger.

Fig 1: Removing Crankshaft Rear Oil Seal Slinger Using Special Tool
Courtesy of FORD MOTOR CO.
Use the special tools to remove the crankshaft rear seal.

Fig 2: Removing Crankshaft Rear Seal Using Special Tool
Courtesy of FORD MOTOR CO.
Remove the six bolts and the crankcase rear seal retainer.

Fig 3: Removing Six Bolts And Crankcase Rear Seal Retainer
Courtesy of FORD MOTOR CO.