LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 587 (Steering Column Switches) >> Diagnosis And Testing >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the multifunction switch or ignition switch.
  2. Visually inspect for the following obvious signs of mechanical and electrical damage.
    Fig 1: Visual Inspection Chart
    G02761603Courtesy of FORD MOTOR CO.
  3. If the fault is not visually evident, determine the symptom and proceed to SYMPTOM CHART .