LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 578 (Wheel Hubs & Bearings-Full Floating Axle-DANA) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Torque Specifications

DESCRIPTION Nm lb-ft lb-in
NOTE: Torque specifications are for clean, dirt- and paint-free, dry bolt and nut threads. Never use oil or grease on studs or nuts.
Axle shaft bolts (1) 143 105 -
Hub nut (back off 90 degrees, then retighten) 95 70 -
  24 18 -
Maximum hub rotating torque (2) 2.3 - 20
Rear disc brake bolts 104 77 -
(1) Apply thread sealer to bolts.

(2) Final adjustment is 0 mm (0 in.) end play.